Home › BODY › SEAT › SEAT HEATER SWITCH

SEAT HEATER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B184680E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Using a moulding remover, disengage the 10 claws and 8 clips starting from the upper part of the center instrument cluster finish panel assembly.

    NOTICE:
    Do not pull on the small storage compartment lid. Doing so may cause damage.

  1. Disconnect each connector and remove the center instrument cluster finish panel assembly.



2. REMOVE SEAT HEATER SWITCH


    B174533
  1. Disengage the 2 claws and remove the seat heater switch.