Home › BODY › WINDSHIELD / WINDOWGLASS › GLASS HATCH OPENER SWITCH

GLASS HATCH OPENER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL GLASS HATCH OPENER SWITCH ASSEMBLY


    B173458
  1. Install the glass hatch opener switch assembly.



    B173459
  1. Engage the guide and install the bracket.

  1. Install the screw.



    B173460
  1. Engage the 2 claws.



2. INSTALL BACK DOOR OUTSIDE GARNISH ASSEMBLY
  1. Install 2 new clips and 5 new gaskets on the back door outside garnish assembly.



    B174405
  1. Engage the 2 clips and install the back door outside garnish assembly.



    B174406
  1. Install the 5 nuts.

  1. Connect each connector.



3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    B174211
  1. Engage the 16 clips and install the back door trim panel assembly.



4. INSTALL ASSIST STRAP ASSEMBLY


    B177264
  1. Install the assist strap assembly with the bolt.



5. INSTALL ASSIST STRAP HOLE COVER


    B177265
  1. Engage the 2 guides and 2 claws, and install the assist strap hole cover.



6. INSTALL BACK DOOR LOCK COVER


    B173203
  1. Engage the 4 guides and 2 claws, and install the back door lock cover.



7. INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door)


    B173199
  1. Engage the 2 clips and 2 claws, and install the back door trim cover LH.



8. INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door)


    B173202
  1. Engage the 2 clips and 2 claws, and install the back door trim cover LH.



9. CONNECT POWER BACK DOOR ROD (w/ Power Back Door)


    B173201
  1. Install the back door stay plate and connect the power back door rod.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



10. INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)


    B173200
  1. Engage the 6 claws and install the back door service hole cover LH.



11. INSTALL BACK DOOR TRIM COVER RH


    B174214
  1. Engage the 2 clips and 2 claws, and install the back door trim cover RH.



12. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY


    B173198
  1. Engage the 4 clips and 4 claws, and install the back window upper trim panel assembly.