Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR MAIN SWITCH

POWER BACK DOOR MAIN SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR CONTROL SWITCH


    B172985
  1. Engage the 2 claws and install the back door control switch.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Connect each connector and clamp.



    B168370
  1. Engage the 4 claws and 3 clips.

  1. Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <E>.



3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B173000
  1. Engage the 2 guides.

  1. Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH


    B177271
  1. Engage the claw and clip, install the cowl side trim sub-assembly RH.

  1. Install the clip.



5. INSTALL FRONT DOOR SCUFF PLATE RH


    B177270
  1. Engage the guide and the 8 claws, and install the front door scuff plate RH.