Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR MAIN SWITCH

POWER BACK DOOR MAIN SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE RH


    B177270
  1. Disengage the 8 claws and guide, and remove the front door scuff plate RH.



2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH


    B177271
  1. Remove the clip.

  1. Disengage the clip and claw, and remove the cowl side trim sub-assembly RH.



3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B172999
  1. Disengage the 3 claws.

  1. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.



4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B168370
  1. Remove the 2 bolts <B> and 3 screws <E>.

  1. Disengage the 4 claws and 3 clips.

  1. Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.



5. REMOVE BACK DOOR CONTROL SWITCH


    B172985
  1. Disengage the 2 claws and remove the back door control switch.