Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR WARNING BUZZER

POWER BACK DOOR WARNING BUZZER > REMOVAL

for Preparation Click here



1. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY


    B173198
  1. Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.



2. REMOVE BACK DOOR SERVICE HOLE COVER LH


    B173200
  1. Disengage the 6 claws, and remove the back door service hole cover LH.



3. DISCONNECT POWER BACK DOOR ROD


    B173201
  1. Disconnect the power back door rod and remove the back door stay plate.



4. REMOVE BACK DOOR TRIM COVER LH


    B173202
  1. Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.



5. REMOVE BACK DOOR TRIM COVER RH


    B174214
  1. Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.



6. REMOVE BACK DOOR LOCK COVER


    B173203
  1. Disengage the 2 claws and 4 guides, and remove the back door lock cover.



7. REMOVE ASSIST STRAP HOLE COVER


    B177265
  1. Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.



8. REMOVE ASSIST STRAP ASSEMBLY


    B177264
  1. Remove the bolt and assist strap assembly.



9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    B174211
  1. Disengage the 16 clips and remove the back door trim panel assembly.



10. REMOVE POWER BACK DOOR WARNING BUZZER


    B172981
  1. Disconnect the connector.

  1. Disengage the clamp and remove the power back door warning buzzer.