POWER BACK DOOR TOUCH SENSOR > REMOVAL |
| 1. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY |
![]() |
Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.
| 2. REMOVE BACK DOOR SERVICE HOLE COVER LH |
![]() |
Disengage the 6 claws, and remove the back door service hole cover LH.
| 3. DISCONNECT POWER BACK DOOR ROD |
![]() |
Disconnect the power back door rod and remove the back door stay plate.
| 4. REMOVE BACK DOOR TRIM COVER LH |
![]() |
Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.
| 5. REMOVE BACK DOOR TRIM COVER RH |
![]() |
Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.
| 6. REMOVE BACK DOOR LOCK COVER |
![]() |
Disengage the 2 claws and 4 guides, and remove the back door lock cover.
| 7. REMOVE ASSIST STRAP HOLE COVER |
![]() |
Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.
| 8. REMOVE ASSIST STRAP ASSEMBLY |
![]() |
Remove the bolt and assist strap assembly.
| 9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY |
![]() |
Disengage the 16 clips and remove the back door trim panel assembly.
| 10. REMOVE POWER BACK DOOR SENSOR ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 4 bolts.
Disengage the 2 clips and remove the power back door sensor assembly.