Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY


    E150335
  1. Install the front blower motor sub-assembly with the 3 screws.

  1. Connect the connector.



2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B173000
  1. Engage the 2 guides.

  1. Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.