Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY


2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B170950
  1. Engage the 2 clips and install the integration control and panel assembly.



    E151584
  1. Engage the claw and connect the connector.



3. INSTALL NO. 2 RADIO BRACKET


    E150553
  1. Install the No. 2 radio bracket with the 5 screws.



4. INSTALL NO. 1 RADIO BRACKET


    E150554
  1. Install the No. 1 radio bracket with the 5 screws.



    E150546
  1. Engage the claw and install the connector.



5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.



    E150552
  1. Engage the 4 clips.



    E150551
  1. Install the radio receiver assembly with bracket with the 4 bolts.



6. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)
  1. Connect the connector.



    E150368
  1. Engage the 4 clips and install the heater control and accessory assembly.



7. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
  1. Connect the connector.



    E150367
  1. Engage the 4 clips and install the air conditioning control assembly.



8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.



9. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    B168369
  1. Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.