Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH


    B172931
  1. Disengage the claw and clip, and remove the front door lower frame bracket garnish.



2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B172920E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel plug.



3. REMOVE FRONT ARMREST UPPER BASE PANEL


    B172922E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.



4. REMOVE ASSIST GRIP COVER


    B174183E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 4 claws and remove the assist grip cover.



5. REMOVE COURTESY LIGHT ASSEMBLY


    B172929E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the courtesy light assembly.

  1. Disconnect the connector.



6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    B172932
  1. Remove the 3 screws.



    B172933
  1. Using a clip remover, disengage the 9 clips.

  1. Disengage the 5 claws and separate the front door trim board sub-assembly from the front door inner glass weatherstrip.



    B172934
  1. Disengage the 2 clamps.

  1. Disconnect the front door lock remote control cable and front door inside locking cable.

  1. Disconnect the connector.



7. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY


    E150556
  1. Disconnect the connector.

  1. Remove the 4 bolts and front No. 1 speaker assembly.

    NOTICE:
    Do not touch the cone part of the speaker.