Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR DOOR SPEAKER

REAR DOOR SPEAKER > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG


    B172920E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws and remove the rear door inside handle bezel plug.



2. REMOVE REAR DOOR ARMREST UPPER BASE PANEL


    B172987E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and 2 clips, and remove the rear door armrest upper base panel.

  1. Disconnect the connector.



3. REMOVE DOOR ASSIST GRIP COVER


    B174184E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 4 claws and remove the door assist grip cover.



4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    B173155
  1. Remove the 3 screws.



    B173156
  1. Using a clip remover, disengage the 9 clips.

  1. Disengage the 5 claws and separate the rear door trim board sub-assembly from the rear door inner glass weatherstrip.



    B173157
  1. Disengage the 2 clamps.

  1. Disconnect the front door lock remote control cable and rear door inside locking cable.



5. REMOVE REAR SPEAKER ASSEMBLY


    E150558
  1. Disconnect the connector.

  1. Remove the 3 bolts and rear speaker assembly.

    NOTICE:
    Do not touch the cone part of the speaker.