INSTRUMENT PANEL SPEAKER > REMOVAL |
| 1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 2. REMOVE FRONT PILLAR GARNISH |
![]() |
Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.
Cut off the clip <A>.
Disengage the 3 guides and remove the front pillar garnish LH.
Remove the clip <A>.
![]() |
Protect the curtain shield airbag assembly.
Cover the airbag with a 700 mm (27.56 in.) x 120 mm (4.72 in.) cloth or piece of nylon and fix the ends of the cover with tape, as shown in the illustration.
| 3. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
![]() |
Disengage the 2 claws and 2 clips.
Disengage the 2 guides and remove the No. 1 instrument panel speaker panel sub-assembly.
| 4. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY |
![]() |
Remove the 2 bolts and front No. 2 speaker assembly.
Disconnect the connector.