Home
›
BODY ELECTRICAL
›
AUDIO / VISUAL
›
INSTRUMENT PANEL SPEAKER
INSTRUMENT PANEL SPEAKER > ON-VEHICLE INSPECTION
for Preparation
Click here
1. INSPECT FRONT NO. 2 SPEAKER
HINT:
Remove interior parts so that the front No. 2 speaker can be seen.
Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 2 speaker.
Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 2 speaker.