Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL STEREO JACK ADAPTER ASSEMBLY (w/o Seat Heater System)


    E151119
  1. Engage the 2 claws and install the stereo jack adapter assembly.



2. INSTALL STEREO JACK ADAPTER ASSEMBLY (w/ Seat Heater System)


    E151121
  1. Engage the 2 claws and install the stereo jack adapter assembly.



3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.