Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR

AMBIENT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE COOL AIR INTAKE DUCT SEAL


    B181107
  1. Remove the 11 clips and cool air intake duct seal.



2. REMOVE RADIATOR GRILLE


    B181108E01
  1. Put protective tape around the radiator grille.



    B181109
  1. Remove the 2 bolts and 4 clips.



    B181110
  1. Disengage the 6 claws and 4 guides, and remove the radiator grille.



3. REMOVE AMBIENT TEMPERATURE SENSOR


    E150337
  1. Disconnect the connector.

  1. Disengage the clamp and remove the ambient temperature sensor.