Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT ARMREST UPPER BASE PANEL


    B172922E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.



2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B172926
  1. Remove the 3 screws and the power window regulator master switch assembly.