Home › BODY › WINDSHIELD / WINDOWGLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR ARMREST UPPER BASE PANEL


    B172987E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and 2 clips, and remove the rear door armrest upper base panel.

  1. Disconnect the connector.



2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B173154
  1. Disengage the 2 claws and remove the rear power window regulator switch assembly.