Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET

CENTER POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL CENTER POWER OUTLET SOCKET COVER


    E151326
  1. Engage the 2 claws and install the center power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET ASSEMBLY


    E151489
  1. Engage the claw and install the power outlet socket assembly.



    E151324
  1. Connect the connector.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B168372
  1. Connect the connector.

  1. Engage the 4 claws and 4 clips, and install the upper console panel sub-assembly.



4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.