Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > INSTALLATION

for Preparation Click here


HINT:
When installing a new name plate and emblem, heat the vehicle body, name plate and emblem using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate, Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plate or emblem excessively.



1. INSTALL SYMBOL EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new symbol emblem.

    1. Using a heat light, heat the vehicle body and a new symbol emblem.

    2. Remove the release paper from the symbol emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the symbol emblem as shown in the illustration.


      B172810E01



2. INSTALL NO. 2 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B172817E01

      Standard measurement:
      Dimension
      Measurement
      A
      96.9 mm (3.815 in.)
      B
      218.9 mm (8.618 in.)
      C
      277.8 mm (10.937 in.)
      D
      277.0 mm (10.905 in.)



3. INSTALL NO. 5 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B181127E01

      Standard measurement:
      Dimension
      Measurement
      A
      88.5 mm (3.484 in.)
      B
      321.4 mm (12.654 in.)



4. INSTALL BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B181128E01

      Standard measurement:
      Dimension
      Measurement
      A
      27.1 mm (1.067 in.)
      B
      151.5 mm (5.965 in.)
      C
      66.0 mm (2.598 in.)
      D
      65.3 mm (2.571 in.)



5. INSTALL NO. 2 FRONT FENDER NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B181129E01

      Standard measurement:
      Dimension
      Measurement
      A
      52 mm (2.047 in.)
      B
      230.8 mm (9.087 in.)
      C
      45.2 mm (1.780 in.)
      D
      109.2 mm (4.299 in.)



6. INSTALL NO. 1 FRONT FENDER NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B181130E01

      Standard measurement:
      Dimension
      Measurement
      A
      52.1 mm (2.051 in.)
      B
      230.4 mm (9.071 in.)
      C
      45.4 mm (1.787 in.)
      D
      109.2 mm (4.299 in.)