Home › BODY › WINDSHIELD / WINDOWGLASS › WINDSHIELD DEICER SYSTEM

WINDSHIELD DEICER SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

E124486E10

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Standard voltage:

    Tester Connection
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D38-10 (FDF1) - D37-14 (GND)
    R - W-B
    Front deicer signal
    Power switch on (IG), Front window deicer switch OFF
    11 to 14 V
    Power switch on (IG), Front window deicer switch ON
    Below 1 V
    D37-1 (IG+) - D37-14 (GND)
    GR - W-B
    Power source (IG)
    Power switch on (IG)
    11 to 14 V
    Power switch off
    Below 1 V
    D37-21 (B) - D37-14 (GND)
    LG - W-B
    Power source (Back-up)
    Always
    11 to 14 V


    Standard resistance:

    Tester Connection
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D37-14 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω

    If the result is not as specified, there may be a malfunction in the wire harness or amplifier.