P310 HYBRID VEHICLE CONTROL > SERVICE DATA |
| Item | Specified Condition |
| Standard valve (for brand-new cap) | 15 to 44 kPa (0.15 to 0.45 kgf/cm2, 2.18 to 6.38 psi) |
| Minimum standard valve (for used cap) | 12 kPa (0.12 kgf/cm2, 1.74 psi) |
| Item | Tester Connection | Specified Condition |
| No. 1 circuit breaker sensor | 1(SIF-) - 2(SIF+) | 0.65 to 1.0 kΩ at 20°C(68°F) |
| IGCT relay Resistance | 3 - 5 | 10 kΩ or higher (When battery voltage is not applied between terminals 1 and 2) |
| 3 - 5 | Below 1Ω (When battery voltage is applied between terminals 1 and 2) |