Home › ENGINE › 3MZ-FE INTAKE › AIR CLEANER AND HOSE

AIR CLEANER AND HOSE > REMOVAL

for Preparation Click here



1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    E150144
  1. Remove the nut, and the front wiper arm and blade assembly LH.



2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    E150145
  1. Remove the nut, and the front wiper arm and blade assembly RH.



3. REMOVE HOOD TO COWL TOP SEAL


    E150148
  1. Disengage the 8 clips and remove the hood to cowl top seal.



4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    E150146
  1. Disengage the 2 claws and disconnect the front fender to cowl side seal LH.



    E150147
  1. Disengage the 2 claws and disconnect the front fender to cowl side seal RH.



  1. Remove the 2 clips.


    E150149

  1. Disengage the 20 claws and remove the cowl top ventilator louver sub-assembly.



5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    E150150
  1. Disconnect the connector.

  1. Remove the 4 bolts, and the windshield wiper motor and link assembly.



6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY


    C175029
  1. Disengage the 4 clamps and separate the wiper wire harness from the outer cowl top panel sub-assembly.



    C175030
  1. Remove the 8 bolts, 6 nuts, and the outer cowl top panel sub-assembly.



7. REMOVE COOL AIR INTAKE DUCT SEAL
  1. Remove the 11 clips and cool air intake duct seal.



8. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH


    A173813
  1. Remove the engine room side cover.



9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    A173489
  1. Remove the 2 bolts, 4 clamps and air cleaner cap sub-assembly.

  1. Remove the air cleaner filter element from the air cleaner case sub-assembly.



10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    A173490
  1. Separate the No. 1 ventilation hose.



    A173491
  1. Disconnect the intake air flow meter connector.

  1. Disconnect the 2 wire harness clamps from the air cleaner case sub-assembly.



    A173492
  1. Remove the 5 bolts from the air cleaner case sub-assembly.



    A173493
  1. Loosen the hose clamp and separate the No. 1 air cleaner hose.

  1. Remove the air cleaner case sub-assembly.



11. REMOVE NO. 1 AIR CLEANER INLET


    A173526
  1. Loosen the hose clamp and remove the No. 1 air cleaner inlet.



12. REMOVE AIR CLEANER CASE


    A173518
  1. Loosen the hose clamp and remove the air cleaner case.



13. REMOVE INTAKE AIR RESONATOR


    A173519
  1. Loosen the hose clamp and remove the intake air resonator.



14. REMOVE NO. 2 INTAKE AIR RESONATOR


    A173520
  1. Loosen the hose clamp and remove the No. 2 intake air resonator.



15. REMOVE NO. 2 AIR CLEANER HOSE


    A194943
  1. Loosen the hose clamp.



    A194944
  1. Remove the No. 2 air cleaner hose and air cleaner pipe.



16. REMOVE NO. 1 VENTILATION HOSE


    A173522
  1. Disconnect the No. 1 ventilation hose from the No. 1 air cleaner hose.