Home › ENGINE › 3MZ-FE FUEL › FUEL PUMP

FUEL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FUEL PUMP FILTER


    A129484E01
  1. Install the fuel suction filter with a new clip.



2. INSTALL FUEL PUMP


    A108196E01
  1. Apply a light coat of spindle oil or gasoline to the O-ring of the fuel pump.



    A182859E02
  1. Push in the fuel pump to the fuel tank fuel filter.



3. INSTALL FUEL PUMP CUSHION RUBBER


    A182858
  1. Install the fuel pump cushion rubber to the fuel pump.



4. INSTALL NO. 2 FUEL SUCTION SUPPORT


    A182860
  1. Install the No. 2 fuel suction support.



5. INSTALL FUEL PUMP HARNESS


    A107254E03
  1. Install the fuel pump harness (A).

  1. Connect the connector (B).



6. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    A107260E02
  1. Connect the fuel pump connector (A).

  1. Install the fuel suction plate.



7. INSTALL FUEL SENDER GAUGE ASSEMBLY


    A182861E01
  1. Slide the fuel sender gauge to engage the claw (A).

  1. Connect the fuel sender gauge connector (B).



8. INSTALL VAPOR PRESSURE SENSOR ASSEMBLY


    A108214E02
  1. Install the vapor pressure sensor assembly with the tube joint clip.

  1. Install the cover.