Home › ENGINE › 3MZ-FE ENGINE MECHANICAL › CYLINDER HEAD

CYLINDER HEAD > REPAIR

for Preparation Click here



1. REPAIR VALVE SEATS

NOTICE:
Releasing the seat-cutter pressure gradually helps to make smoother valve seat faces.



    A080663E03
  1. If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.



    A078781E07
  1. If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.

  1. Handrub the valve and valve seat with an abrasive compound.

  1. Recheck the valve seating position.