Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › BRAKE CONTROL

BRAKE CONTROL > SERVICE DATA



Brake actuator assembly operation
FR system solenoids
Sensor
10 to 20 sec. after check start (V)
35 sec. or more after check start (V)
Master Cylinder Sensor
0.3 to 0.7
0.3 to 0.7
Master Cylinder Sensor 2
0.3 to 0.7
0.3 to 0.7
FR W/C Sensor
2.5 to 4.5
0.3 to 0.7
FL W/C Sensor
0.3 to 0.7
0.3 to 0.7
RR W/C Sensor
0.3 to 0.7
0.3 to 0.7
RL W/C Sensor
0.3 to 0.7
0.3 to 0.7
FL system solenoids
Sensor
10 to 20 sec. after check start (V)
35 sec. or more after check start (V)
Master Cylinder Sensor
0.3 to 0.7
0.3 to 0.7
Master Cylinder Sensor 2
0.3 to 0.7
0.3 to 0.7
FR W/C Sensor
0.3 to 0.7
0.3 to 0.7
FL W/C Sensor
2.5 to 4.5
0.3 to 0.7
RR W/C Sensor
0.3 to 0.7
0.3 to 0.7
RL W/C Sensor
0.3 to 0.7
0.3 to 0.7
RR system solenoids
Sensor
10 to 20 sec. after check start (V)
35 sec. or more after check start (V)
Master Cylinder Sensor
0.3 to 0.7
0.3 to 0.7
Master Cylinder Sensor 2
0.3 to 0.7
0.3 to 0.7
FR W/C Sensor
0.3 to 0.7
0.3 to 0.7
FL W/C Sensor
0.3 to 0.7
0.3 to 0.7
RR W/C Sensor
2.5 to 4.7
0.3 to 0.7
RL W/C Sensor
0.3 to 0.7
0.3 to 0.7
RL system solenoids
Sensor
10 to 20 sec. after check start (V)
35 sec. or more after check start (V)
Master Cylinder Sensor
0.3 to 0.7
0.3 to 0.7
Master Cylinder Sensor 2
0.3 to 0.7
0.3 to 0.7
FR W/C Sensor
0.3 to 0.7
0.3 to 0.7
FL W/C Sensor
0.3 to 0.7
0.3 to 0.7
RR W/C Sensor
0.3 to 0.7
0.3 to 0.7
RL W/C Sensor
2.5 to 4.7
0.3 to 0.7

PRESSURE SENSOR OPERATION
Brake effort {N (kgf, lbf)}
Master Cylinder Sensor (V)
Master Cylinder Sensor 2 (V)
200 (20.4, 45)
0.90 to 1.30
0.90 to 1.30
500 (51, 112)
2.10 to 2.50
2.10 to 2.50

PRESSURE SENSOR OPERATION
Front right side
Brake effort {N (kgf, lbf)}
Front right wheel hydraulic pressure {MPa (kgf/cm2, psi)}
FR W/C Sensor (V)
50 (5.1, 11)
2.4 (24.5, 348)
0.80 to 1.20
100 (10.2, 22)
5.4 (54.1, 783)
1.40 to 1.80
150 (15.3, 34)
6.5 (66.3, 943)
1.60 to 2.00
200 (20.4, 45)
7.1 (72.4, 1030)
1.75 to 2.15
Front left side
Brake effort {N (kgf, lbf)}
Front left wheel hydraulic pressure {MPa (kgf/cm2, psi)}
FL W/C Sensor (V)
50 (5.1, 11)
2.4 (24.5, 348)
0.80 to 1.20
100 (10.2, 22)
5.4 (54.1, 783)
1.40 to 1.80
150 (15.3, 34)
6.5 (66.3, 943)
1.60 to 2.00
200 (20.4, 45)
7.1 (72.4, 1030)
1.75 to 2.15
Rear right side
Brake effort {N (kgf, lbf)}
Rear right wheel hydraulic pressure {MPa (kgf/cm2, psi)}
RR W/C Sensor (V)
50 (5.1, 11)
2.4 (24.5, 348)
0.80 to 1.20
100 (10.2, 22)
5.0 (51.0, 725)
1.30 to 1.70
150 (15.3, 34)
5.0 (51.0, 725)
1.30 to 1.70
200 (20.4, 45)
5.0 (51.0, 725)
1.30 to 1.70
Rear left side
Brake effort {N (kgf, lbf)}
Rear left wheel hydraulic pressure {MPa (kgf/cm2, psi)}
RL W/C Sensor (V)
50 (5.1, 11)
2.4 (24.5, 348)
0.80 to 1.20
100 (10.2, 22)
5.0 (51.0, 725)
1.30 to 1.70
150 (15.3, 34)
5.0 (51.0, 725)
1.30 to 1.70
200 (20.4, 45)
5.0 (51.0, 725)
1.30 to 1.70


Tester Connection
Condition
Specified Condition
Stop Light Control relay
3 - 4
Voltage is not applied between terminals 1 and 2
Below 1 Ω
3 - 5
Voltage is not applied between terminals 1 and 2
10 kΩ or higher
3 - 4
Voltage is applied between terminals 1 and 2
10 kΩ or higher
3 - 5
Voltage is applied between terminals 1 and 2
Below 1 Ω
ABS MAIN relay
Resistance 3 - 5
Always
10 kΩ or higher
Resistance 3 - 5
Battery positive voltage is applied between terminals 1 and 2
Below 1 Ω
ABS MOTOR relay
Resistance 3 - 5
Always
10 kΩ or higher
Resistance 3 - 5
Battery positive voltage is applied between terminals 1 and 2
Below 1 Ω
Brake Pedal Stroke Sensor

When brake pedal is released
0.7 to 1.3 V