HYBRID BATTERY SYSTEM > CHECK FOR INTERMITTENT PROBLEMS |
| CHECK FOR INTERMITTENT PROBLEM |
Perform a simulation test (Click here).
For the simulation test, reproduce the driving conditions that were present when trouble occurred. Those conditions should be based on the customer's comments and freeze frame data that is recorded with DTCs, such as an opening angle of the accelerator pedal, SOC, engine coolant temperature, engine rpm, and MG2/MG1/MGR rpm and torque.
Check the connector(s) and terminal(s) (Click here).
Wiggle the harness and connector(s) (Click here).
Heat or cool suspected parts (Click here).