Home › Vehicle Exterior › BODY PANEL › FRONT FENDER APRON
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112103 FRONT FENDER APRON F

BODY WELD POINT  FRONT FENDER APRON  ASSEMBLY REPLACEMENT  


K110655

With the radiator side support and cowl top side panel removed.


REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.


K110656

K110657

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108830

Fillet Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

4.

Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

5.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

6.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110658
2.563,3.729 2.385,2.917 2.385,2.917 2.25,2.917 false 2.115,2.823 2.427,2.979 0.313,0.156 10 false *1
*1 FRONT FENDER APRON SUB-ASSEMBLY - -


K110659
0.25,8.479 0.563,8.635 0.313,0.156 10 false *b 1.26,4.323 2.49,4.521 1.229,0.198 10 false 6 (0.24) 2.51,3.438 3.74,3.635 1.229,0.198 10 false 6 (0.24) 2.417,3.844 3.792,4.042 1.375,0.198 10 false 14 (0.55) 1.979,4.198 3.354,4.396 1.375,0.198 10 false 12 (0.47)
*b mm (in.) - -


K110660
1.083,1.146 1.396,1.302 0.313,0.156 12 false *A 1.083,4.729 1.396,4.885 0.313,0.156 12 false *B
*A LH *B RH