Home › Vehicle Exterior › BODY PANEL › FRONT SIDE MEMBER
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112104 FRONT SIDE MEMBER F

BODY WELD POINT  FRONT SIDE MEMBER  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K110661

With the radiator side support and radiator lower support removed.


REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


REMOVAL POINT
1.

Carefully cut the front side member sub-assembly inner so not to damage *a.


K110662
4.885,2.208 5.167,1.646 5.167,1.646 5.313,1.646 false 5.323,1.563 5.635,1.719 0.313,0.156 10 false *1 0.208,8.51 0.521,8.667 0.313,0.156 10 false *b 3.521,3.281 5.208,3.479 1.688,0.198 10 false 400 (15.75)
*1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER - -
*b mm (in.) - -


K110663
0.979,0.646 1.292,0.802 0.313,0.156 12 false *A 0.979,4.656 1.313,4.844 0.333,0.188 12 false *B
*A LH *B RH


Reference Value
Area Measurement Area Measurement
A 165 mm (6.50 in.) B 65 mm (2.56 in.)
C 165 mm (6.50 in.) D 65 mm (2.56 in.)

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

3.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110664
3.25,7.698 3.135,7.698 3.135,7.698 2.792,7.219 false 4.823,2.208 5.229,1.604 5.229,1.604 5.417,1.604 false 5.438,1.51 5.75,1.667 0.313,0.156 10 false *1 3.271,7.615 3.583,7.771 0.313,0.156 10 false *2
*1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER *2 FRONT SIDE MEMBER EXTENSION