Home › Vehicle Exterior › BODY PANEL › FRONT DOOR OUTER PANEL
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112109 FRONT DOOR OUTER PANEL F

BODY WELD POINT  FRONT DOOR OUTER PANEL  ASSEMBLY REPLACEMENT  


K110675



REMOVAL


Symbol meaning
K108818

Remove Weld Points


REMOVAL POINT
1.

Before removing the outer panel, mark the installation position with tape.

2.

Before removing the outer panel, establish its exact position in relation to the window frame using a reference marker, etc.

3.

After grinding off the hemming location, remove the outer panel.


K110676
4.448,1.844 4.719,1.563 4.719,1.563 4.833,1.563 false 3.927,7.198 4.177,7.427 4.177,7.427 4.292,7.427 false 4.865,1.479 5.177,1.635 0.313,0.156 10 false *1 4.313,7.344 4.625,7.5 0.313,0.156 10 false *2 3.813,1.948 4.125,2.104 0.313,0.156 10 false *a 3.573,5.406 3.885,5.563 0.313,0.156 10 false *b
*1 Positioning Tape *2 Disc Sander
*a Installation Postion *b Hemming Location


INSTALLATION


Symbol meaning
K108823

Plug Weld
K108833

Spot MIG Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Before temporarily installing the new parts, apply body sealer to the reinforcement, side impact protection beam and backside of the new parts.

NOTICE:

Do not close the drain hole.


HINT:

Apply sealer evenly about 10 mm (0.39 in.) from the flange and 3 mm (0.12 in.) in diameter on the outer panel and apply just enough sealer for the reinforcement and side impact protection beam to make contact.


2.

Bend the flange hem with a wooden hammer and dolly.

HINT:

Bend the panel gradually so as not to distort it.


3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110677
3.615,1.438 3.865,1.198 3.865,1.198 4,1.198 false 2.49,3.771 2.49,3.563 false 6.229,5.729 6.302,5.479 6.302,5.479 6.427,5.479 false 6.417,6.219 6.583,6.302 6.583,6.302 6.719,6.302 false 5.49,6.948 5.615,6.948 5.615,6.948 5.802,6.688 false 4.021,1.115 4.333,1.271 0.313,0.156 10 false *1 2.417,3.771 2.729,3.927 0.313,0.156 10 false *2 6.74,6.219 7.052,6.375 0.313,0.156 10 false *3 6.448,5.396 6.76,5.552 0.313,0.156 10 false *4 5.344,6.854 5.656,7.01 0.313,0.156 10 false *5 6.177,3.813 6.49,3.969 0.313,0.156 10 false *a 0.271,8.458 0.583,8.615 0.313,0.156 10 false *b 4.698,2.125 6.073,2.323 1.375,0.198 10 false 10 (0.39)
*1 Positioning Tape *2 FRONT DOOR PANEL OUTER
*3 Dolly *4 Cloth Tape
*5 Wooden Hammer - -
*a Drain hole *b mm (in.)