Home › Vehicle Exterior › BODY PANEL › ROCKER OUTER PANEL
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112111 ROCKER OUTER PANEL F

BODY WELD POINT  ROCKER OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K110681

REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts


K110682
0.26,8.448 0.573,8.604 0.313,0.156 10 false *a 3.021,4.229 4.708,4.427 1.688,0.198 10 false 490 (19.29)
*a mm (in.) - -


K110683

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110684
3.448,3.271 3.271,2.583 3.271,2.583 3.156,2.583 false 3.021,2.49 3.333,2.646 0.313,0.156 10 false *1
*1 REAR BODY FRONT OUTSIDE PANEL - -