Home › Vehicle Exterior › BODY PANEL › QUARTER PANEL
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112113 QUARTER PANEL F

BODY WELD POINT  QUARTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K110689

REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts


K110690
1.385,1.74 2.917,1.938 1.531,0.198 10 false 200 (7.87) 0.219,8.573 0.531,8.729 0.313,0.156 10 false *a
*a mm (in.) - -


INSTALLATION


Symbol meaning
K108821

Spot Weld
K108823

Plug Weld
K108831

Butt Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Before installing a new part, apply body sealer.

HINT:
·

Apply body sealer evenly about 5 mm (0.20 in.) from the flange, avoiding any oozing.

·

Apply body sealer evenly, about 3 to 4 mm (0.12 to 0.16 in.) in diameter.



4.

After welding, apply foamed sealing material to the corresponding parts. (See the painting / coating)

5.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

6.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110691
2.792,4.708 2.667,4.708 2.667,4.708 2.406,3.75 false 2.823,4.615 3.135,4.771 0.313,0.156 10 false *1 0.281,8.51 0.594,8.667 0.313,0.156 10 false *a 2.052,5.208 3.281,5.406 1.229,0.198 10 false 5 (0.20)
*1 QUARTER PANEL - -
*a mm (in.) - -