Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112115 BACK DOOR OPENING TROUGH F

BODY WELD POINT  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K110710

With the quarter panel removed.


REMOVAL


Symbol meaning
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


K110711
0.177,8.542 0.49,8.698 0.313,0.156 10 false *a 1.51,0.958 3.042,1.156 1.531,0.198 10 false 100 (3.94)
*a mm (in.) - -


INSTALLATION


Symbol meaning
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K110712
1.635,1.365 1.75,1.365 1.75,1.365 2.083,1.708 false 1.49,1.271 1.802,1.427 0.313,0.156 10 false *1
*1 QUARTER PANEL SUB-ASSEMBLY OUTER - -