Home › Vehicle Exterior › BODY PANEL › NAME PLATE
BM3160E _01 Vehicle Exterior _021870 BODY WELD POINT _0112128 NAME PLATE F

BODY WELD POINT  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



B368009
0.167,6.198 4.365,8.229 4.198,2.031 2.24,8.469 2.24,8.229 false 2.302,5.688 2.302,5.292 false 5.948,5.74 5.948,5.344 false 5.854,7.677 5.854,7.281 false 3.573,4.552 3.573,4.156 false 3.594,1.135 3.594,0.313 3.594,0.313 3.188,0.313 false 2.198,1.385 2.823,1.385 false 2.219,1.646 2.896,1.646 false 4.365,1.396 4.99,1.396 false 4.333,1.646 5.01,1.646 false 2.26,5.708 2.573,5.865 0.313,0.156 10 false *1 2.188,8.5 2.5,8.656 0.313,0.156 10 false *2 5.906,5.781 6.219,5.938 0.313,0.156 10 false *3 5.802,7.708 6.115,7.865 0.313,0.156 10 false *4 3.521,4.583 3.833,4.74 0.313,0.156 10 false *5 3.344,4.563 3.5,4.719 0.156,0.156 10 false ● 5.708,5.76 5.865,5.917 0.156,0.156 10 false ● 2.094,5.688 2.25,5.844 0.156,0.156 10 false ● 2.042,8.479 2.198,8.635 0.156,0.156 10 false ● 5.615,7.688 5.771,7.844 0.156,0.156 10 false ● 2.885,0.219 3.344,0.417 0.458,0.198 10 false <A> 1.906,1.302 2.365,1.5 0.458,0.198 10 false <B> 1.906,1.563 2.365,1.76 0.458,0.198 10 false <C> 5.333,5.771 5.792,5.969 0.458,0.198 10 false <D> 5.063,1.563 5.521,1.76 0.458,0.198 10 false <E> 2.99,4.573 3.448,4.771 0.458,0.198 10 false <A> 1.75,5.677 2.208,5.875 0.458,0.198 10 false <B> 1.677,8.5 2.135,8.698 0.458,0.198 10 false <C> 5.281,7.698 5.74,7.896 0.458,0.198 10 false <E> 5.063,1.302 5.521,1.5 0.458,0.198 10 false <D>
*1 NO. 1 BACK DOOR NAME PLATE *2 NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
*3 NO. 4 BACK DOOR NAME PLATE *4 NO. 4 LUGGAGE COMPARTMENT DOOR PLATE
*5 SYMBOL EMBLEM - -
● Non-reusable part - -


INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR PLATE


B363110
4.583,1.125 4.958,1.5 false 4.958,1.948 4.688,2.344 4.688,2.344 5.51,1.896 false 5.865,1.5 6.219,1.125 false 5.219,1.802 5.5,1.5 false 4.417,1.073 4.729,1.229 0.313,0.156 10 false *a 4.5,2.281 4.813,2.438 0.313,0.156 10 false *b 6.271,1.052 6.49,1.208 0.219,0.156 10 true *b 5.042,1.729 5.24,1.885 0.198,0.156 10 true *a 4.438,1.635 4.594,1.833 0.156,0.198 10 false A 5.344,0.729 5.5,0.927 0.156,0.198 10 false B 6.281,1.615 6.438,1.813 0.156,0.198 10 false C 5.646,2.406 5.802,2.604 0.156,0.198 10 false D
*a Edge of Curved Surface *b Profile of Back Door Panel


Standard Measurement:
Area Measurement Area Measurement
A 60 mm (2.36 in.) B 123 mm (4.84 in.)
C 54 mm (2.13 in.) D 47 mm (1.85 in.)



INSTALL NO. 4 BACK DOOR NAME PLATE


B362669
5.729,0.792 5.802,0.49 5.802,0.49 4.917,0.823 false 6.063,0.781 6.396,0.448 false 6.031,1.24 6.333,1.573 false 4.927,1.219 5.083,1.031 false 5.542,1.01 5.719,1.219 false 5.104,0.948 5.417,1.104 0.313,0.156 10 false *a 6.375,1.51 6.563,1.667 0.188,0.156 10 true *b 5.385,0.948 5.698,1.104 0.313,0.156 10 false *a 5.865,0.406 6.177,0.563 0.313,0.156 10 false *a 6.438,0.396 6.75,0.552 0.313,0.156 10 false *b 4.271,0.948 4.427,1.146 0.156,0.198 10 false A 6.583,0.917 6.74,1.115 0.156,0.198 10 false B 5.385,2.229 5.542,2.427 0.156,0.198 10 false C 5.823,1.927 5.979,2.125 0.156,0.198 10 false D
*a Edge of Curved Surface *b Profile of Back Door Panel


Standard Measurement:
Area Measurement Area Measurement
A 36 mm (1.42 in.) B 38 mm (1.50 in.)
C 122 mm (4.80 in.) D 33 mm (1.30 in.)



INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


for HIGHLANDER Plate:
B362671
3.958,1.292 4.333,1.604 false 6.448,1.99 6.823,2.302 false 4.542,1.583 4.76,1.781 false 5.938,1.792 6.25,1.594 false 4.813,1.708 5.125,1.865 0.313,0.156 10 false *a 3.781,1.208 4.094,1.365 0.313,0.156 10 false *b 5.76,1.719 6.073,1.875 0.313,0.156 10 false *a 6.844,2.25 7.156,2.406 0.313,0.156 10 false *b 5.198,0.781 5.354,0.979 0.156,0.198 10 false A 4.385,2.406 4.542,2.604 0.156,0.198 10 false B 6.542,1.719 6.698,1.917 0.156,0.198 10 false C
*a Edge of Curved Surface *b Profile of Back Door Panel


Standard Measurement:
Area Measurement Area Measurement
A 299 mm (11.8 in.) B 35 mm (1.38 in.)
C 62 mm (2.44 in.) - -


for KLUGER Plate:
B362672
3.938,1.313 4.365,1.583 false 5.833,1.99 6.26,2.26 false 4.583,1.583 4.813,1.823 false 5.635,1.583 5.365,1.833 false 3.76,1.25 4.073,1.406 0.313,0.156 10 false *b 4.854,1.75 5.167,1.906 0.313,0.156 10 false *a 5.198,1.76 5.51,1.917 0.313,0.156 10 false *a 6.302,2.188 6.615,2.344 0.313,0.156 10 false *b 4.927,0.76 5.083,0.958 0.156,0.198 10 false A 4.438,2.354 4.594,2.552 0.156,0.198 10 false B 5.896,1.698 6.052,1.896 0.156,0.198 10 false C
*a Edge of Curved Surface *b Profile of Back Door Panel


Standard Measurement:
Area Measurement Area Measurement
A 197 mm (7.76 in.) B 35 mm (1.38 in.)
C 60 mm (2.36 in.) - -



INSTALL NO. 1 BACK DOOR NAME PLATE


B362668
4.688,0.958 6.188,0.344 6.188,0.344 5.792,0.875 false 5.802,1.313 6.188,1.625 false 4.427,1.313 4.01,1.677 false 4.969,1.094 4.698,1.302 false 3.833,1.594 4.146,1.75 0.313,0.156 10 false *b 5,1 5.198,1.177 0.198,0.177 10 true *a 6.25,0.25 6.563,0.406 0.313,0.156 10 false *a 6.208,1.542 6.396,1.729 0.188,0.188 10 true *a 3.771,1.052 3.927,1.25 0.156,0.198 10 false A 6.375,1.01 6.531,1.208 0.156,0.198 10 false B 4.521,1.979 4.656,2.167 0.135,0.188 10 true C
*a Edge of Curved Surface *b Profile of Back Door Panel


Standard Measurement:
Area Measurement Area Measurement
A 29 mm (1.14 in.) B 37 mm (1.46 in.)
C 35 mm (1.38 in.) - -