Home › Vehicle Exterior › BODY DIMENSIONS › REAR DOOR
BM3160E _01 Vehicle Exterior _021871 BODY DIMENSIONS _0112132 REAR DOOR F

BODY DIMENSIONS  REAR DOOR  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Use specification *a when performing centering measurements for the body dimensions.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Symbol Name Hole Diameter
mm (in.)
A, a Roof Side Rail Assembly Mark -
B, b Rear Door Hinge Installation Nut M8 (0.31)
C, c Rear Door Hinge Installation Nut M8 (0.31)
D, d Center Body Pillar Assembly Mark -
E, e Center Body Pillar Assembly Mark -
F, f Rocker Panel Assembly Mark -
G, g Roof Side Rail Assembly Mark -
H, h Quarter Panel Assembly Mark -
J, j Quarter Panel Assembly Mark -
K, k Rear Door Lock Striker Installation Nut M8 (0.31)
L, l Front Floor Brace Center Standard Hole φ10 (0.39)
*a Front Floor Panel Reinforcement Front Standard Hole φ10 (0.39)

K110791
0.646,6.615 0.958,6.771 0.313,0.156 10 false *b 0.073,8.656 0.385,8.813 0.313,0.156 10 false *c
*b Distance between points other than those above *c mm
(in.)


K110792
0.667,7.375 0.979,7.531 0.313,0.156 10 false *b 0.063,8.667 0.375,8.823 0.313,0.156 10 false *c
*b Distance between points other than those above *c mm
(in.)