Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT REFERENCE VALUES › 2013.12–2016.11
BM3160E _01 Vehicle Exterior _021871 BODY DIMENSIONS _0112138 ENGINE COMPARTMENT REFERENCE VALUES F

BODY DIMENSIONS  ENGINE COMPARTMENT REFERENCE VALUES  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the cool air intake duct seal, radiator side seal and front fender protector upper removed.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Symbol Name Hole Diameter
mm (in.)
A, a Radiator Glill Installation Clip -
B, b Headlight Installation Screw -
C, c Headlight Installation Screw -
D, d Front Fender Installation Bolt M6 (0.24)
E, e Front Fender Installation Bolt M6 (0.24)

K110811
2.063,7.396 2.375,7.552 0.313,0.156 10 false *a 0.063,8.635 0.375,8.792 0.313,0.156 10 false *b
*a Distance between points other than those above *b mm
(in.)