Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › SFI SYSTEM › 2013.12–2016.11
NM3160E _51 Engine / Hybrid System _020739 2GR-FE ENGINE CONTROL _0105513 SFI SYSTEM CO CONTROL F

2GR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The Dual Variable Valve Timing-intelligent (VVT-i) system is designed to control the intake and exhaust camshafts within a range of 40° and 35° respectively (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy, and reducing exhaust emissions.

W100032
0.438,0.573 0.625,0.573 0.625,0.573 1.021,1.042 true 1.177,1.25 1.229,1.406 1.229,1.406 1.365,1.406 true 1.021,0.323 1.208,0.323 1.208,0.323 1.51,0.927 true 2.354,0.99 2.563,0.99 2.563,0.99 2.677,1.094 true 1.688,1.469 2.135,1.208 2.135,1.208 2.302,1.208 true 2.49,1.677 3.198,1.844 3.198,1.844 3.365,1.844 true 2.01,1.875 3.208,2.052 3.208,2.052 3.375,2.052 true 0.323,1.573 1.573,1.573 true 1.771,2.906 2.49,3.031 2.49,3.031 2.656,3.031 true 0.302,0.969 0.49,0.969 0.49,0.969 0.875,1.177 true 0.271,0.5 0.469,0.688 0.198,0.188 10 false *1 1.385,1.323 1.573,1.49 0.188,0.167 10 false *2 0.865,0.24 1.063,0.427 0.198,0.188 10 false *3 2.198,0.906 2.396,1.083 0.198,0.177 10 false *4 2.333,1.125 2.521,1.313 0.188,0.188 10 false *5 3.406,1.76 3.635,1.958 0.229,0.198 10 false *6 3.417,1.969 3.594,2.135 0.177,0.167 10 false *7 0.146,1.49 0.333,1.677 0.188,0.188 10 false *8 2.708,2.948 2.938,3.146 0.229,0.198 10 false *9 0.063,0.885 0.323,1.104 0.26,0.219 10 false *10 5.813,2.719 6.073,2.938 0.26,0.219 10 false *12 4.583,2.073 4.844,2.292 0.26,0.219 10 false *11
*1 Cam Timing Oil Control Valve Assembly (Bank 1 Exhaust Side) *2 Cam Timing Oil Control Valve Assembly (Bank 1 Intake Side)
*3 Camshaft Position Sensor (Bank 1 Exhaust Side) *4 Engine Coolant Temperature Sensor
*5 Cam Timing Oil Control Valve Assembly (Bank 2 Intake Side) *6 Camshaft Position Sensor (Bank 2 Exhaust Side)
*7 Cam Timing Oil Control Valve Assembly (Bank 2 Exhaust Side) *8 Camshaft Position Sensor (Bank 2 Intake Side)
*9 Crank Position Sensor *10 Camshaft Position Sensor (Bank 1 Intake Side)
*11 ECM *12 Intake Mass Air Flow Meter Sub-assembly
·

Throttle Position Sensor





b.

The dual VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below.

1.

During Idling

W110969
3.438,1.563 3.896,1.76 0.458,0.198 10 BDC 2.729,0.833 3.188,1.031 0.458,0.198 10 EX 4.281,0.833 4.74,1.031 0.458,0.198 10 IN 1.833,0.125 3.146,0.594 1.313,0.469 10 Earliest Timing (EX) 4.146,0.125 5.49,0.458 1.344,0.333 10 Latest Timing (IN) 3.448,0.063 3.906,0.26 0.458,0.198 10 TDC

Objective Effect
Eliminating overlap reduces blow back to the intake side.
·

Stabilized idle speed

·

Better fuel economy



2.

At Light Load

W110970
3.438,1.594 3.896,1.76 0.458,0.167 10 BDC 2.813,0.854 3.063,1.104 0.25,0.25 10 EX 4.219,0.865 4.469,1.115 0.25,0.25 10 IN 3.448,0.073 3.865,0.323 0.417,0.25 10 TDC 1.688,0.146 3.063,0.615 1.375,0.469 10 To Advance Side (EX) 4.104,0.146 5.354,0.542 1.25,0.396 10 To Retard Side (IN)

Objective Effect
Eliminating overlap reduces blow back to the intake side. Ensured engine stability

3.

At Medium Load

W110971
2.792,0.885 3.104,1.083 0.313,0.198 10 EX 4.219,0.875 4.531,1.073 0.313,0.198 10 IN 3.427,1.583 3.792,1.75 0.365,0.167 10 BDC 3.427,0.073 3.792,0.24 0.365,0.167 10 TDC 1.802,0.125 3.25,0.417 1.448,0.292 10 To Advance Side (IN) 4.073,0.135 5.49,0.396 1.417,0.26 10 To Retard Side (EX)

Objective Effect
Increasing overlap increases internal EGR, reducing pumping losses.
·

Better fuel economy

·

Improved emission control



4.

In Low to Medium Speed Range with Heavy Load

W110972
4.26,0.792 4.573,0.99 0.313,0.198 10 IN 2.719,0.802 3.031,1 0.313,0.198 10 EX 3.406,1.583 3.885,1.75 0.479,0.167 10 BDC 1.802,1.438 3.115,1.688 1.313,0.25 10 To Retard Side (EX) 4.125,1.448 5.469,1.698 1.344,0.25 10 To Advance Side (IN) 3.417,0.021 3.896,0.188 0.479,0.167 10 TDC

Objective Effect
Advancing the intake valve closing timing improves volumetric efficiency. Improved torque in low to medium speed range

5.

In High Speed Range with Heavy Load

W110973
3.417,1.583 3.875,1.781 0.458,0.198 10 BDC 3.417,0.031 3.875,0.229 0.458,0.198 10 TDC 2.719,0.781 3.01,0.979 0.292,0.198 10 EX 4.25,0.781 4.542,0.979 0.292,0.198 10 IN 1.854,1.417 3.031,1.677 1.177,0.26 10 To Retard Side (IN) 4.177,1.427 5.583,1.688 1.406,0.26 10 To Advance Side (EX)

Objective Effect
Retarding the intake valve closing timing improves volumetric efficiency. Improved output

6.

At Low Temperatures

W110974
3.438,1.583 3.896,1.781 0.458,0.198 10 BDC 3.458,0.073 3.917,0.271 0.458,0.198 10 TDC 2.781,0.844 3.073,1.094 0.292,0.25 10 EX 4.26,0.844 4.552,1.094 0.292,0.25 10 IN 1.844,0.188 3.146,0.365 1.302,0.177 10 Earliest Timing (EX) 4.146,0.188 5.438,0.458 1.292,0.271 10 Latest Timing (IN)

Objective Effect
Eliminating overlap reduces blow back to the intake side to stabilize the idle speed during fast idle.
·

Stabilized fast idle speed

·

Better fuel economy



7.

Starting the Engine/Stopping the Engine

W110974
3.438,1.583 3.896,1.781 0.458,0.198 10 BDC 3.458,0.083 3.917,0.281 0.458,0.198 10 TDC 2.771,0.833 3.063,1.083 0.292,0.25 10 EX 4.271,0.833 4.563,1.083 0.292,0.25 10 IN 1.833,0.188 3.063,0.438 1.229,0.25 10 Earliest Timing (EX) 4.125,0.188 5.292,0.438 1.167,0.25 10 Latest Timing (IN)

Objective Effect
Eliminating overlap reduces blow back to the intake side. Improved startability