Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › SFI SYSTEM › 2013.12–2016.11
NM3160E _51 Engine / Hybrid System _020739 2GR-FE ENGINE CONTROL _0105513 SFI SYSTEM DE DETAILS F

2GR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  FUEL PUMP CONTROL  


OPERATION


a.

The fuel pump is controlled by the ECM through the fuel pump control ECU assembly. Based on the signal received from the ECM, the fuel pump control ECU assembly controls the voltage supplied to the fuel pump to 3 levels (low, mid and high). Battery voltage is directly supplied to the fuel pump for high. However, for mid and low, Pulse Width Modulation (PWM) control is used to control the voltage supplied. This contributes to fuel economy by reducing current consumption compared to conventional control, which operates by switching a resistor in and out of the circuit. The fuel pump control system has a fuel cut control function. Fuel cut control stops the fuel pump when any of the SRS airbags has deployed.

i.

When the ECM detects the airbag deployment signal from the airbag sensor assembly, the ECM will turn the EFI main relay off. After fuel cut control has been activated, turning the ignition switch from off to ON cancels fuel cut control, and the engine can be restarted.

W114970
0.229,1.083 1.49,1.573 1.26,0.49 10 false Front Airbag Sensor (RH or LH) 0.229,3.823 1.448,4.323 1.219,0.5 10 false Rear Airbag Sensor (RH or LH) 0.229,2.333 1.448,2.927 1.219,0.594 10 false Side Airbag Sensor Assembly (RH or LH) 2.104,3.094 3.01,3.688 0.906,0.594 10 false Airbag Sensor Assembly 3.156,3.396 3.667,3.823 0.51,0.427 10 false CAN (V Bus) 4.063,3.198 4.469,3.448 0.406,0.25 10 false ECM 2.365,0.521 2.885,0.76 0.521,0.24 10 false Battery 3.469,0.708 3.844,1.021 0.375,0.313 10 false Fuse 4.417,0.156 5.427,0.385 1.01,0.229 10 false EFI Main Relay 5.375,3.063 6.167,3.688 0.792,0.625 10 false Fuel Pump Control ECU Assembly 6.698,3.146 7.115,3.813 0.417,0.667 10 false Fuel Pump Motor