Home › Engine / Hybrid System › 1AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3160E _51 Engine / Hybrid System _020725 1AR-FE ENGINE MECHANICAL _0105514 ENGINE UNIT GE GENERAL F

1AR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 1AR-FE engine is an in-line 4-cylinder, 2.7 liter, 16 valve DOHC engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

W100788



SPECIFICATION


Engine Type 1AR-FE

*1: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. (Coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids.)

*2: The figure shown is the weight of the part without coolant and oil.

No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(With Dual VVT-i)
Combustion Chamber Pentroof Type
Flow of Intake and Exhaust Gasses Cross-flow
Fuel System SFI
Ignition System DIS
Displacement cm3 (cu. in.) 2672 (163.0)
Bore X Stroke mm (in.) 90.0 X 105.0 (3.54 X 4.13)
Compression Ratio 10.0 : 1
Max. Output (EEC) kW@rpm 138@5800
Max. Torque (EEC) N*m@rpm 252@4200
Oil Capacity Dry liters (US qts, Imp. qts) 5.3 (5.6, 4.7)
With Oil Filter liters (US qts, Imp. qts) 4.4 (4.6, 3.9)
Without Oil Filter liters (US qts, Imp. qts) 4.0 (4.2, 3.5)
Oil Grade API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil
Engine Coolant Type TOYOTA Genuine Super Long Life
Coolant or the following*1
Capacity liters (US qts, Imp. qts) 9.2 (9.7, 8.1)
Spark Plug Type DENSO Made SK16HR11 (Iridium)
Plug Gap mm (in.) 1.0 to 1.1 (0.0394 to 0.0433)
Firing Order 1 - 3 - 4 - 2
Fuel Octane Number 91 or higher
Emission Regulation EURO V
Engine Service Mass*2 (Reference) kg (lb) 135 (298)

W115587
0.198,0.208 1.792,0.479 1.594,0.271 12 false Performance Curve: 2.271,5.354 2.625,5.563 0.354,0.208 10 false 1000 2.698,5.354 3.052,5.563 0.354,0.208 10 false 2000 3.115,5.354 3.469,5.563 0.354,0.208 10 false 3000 3.542,5.354 3.896,5.563 0.354,0.208 10 false 4000 3.969,5.354 4.323,5.563 0.354,0.208 10 false 5000 4.396,5.354 4.75,5.563 0.354,0.208 10 false 6000 4.813,5.354 5.167,5.563 0.354,0.208 10 false 7000 3.292,5.521 4.25,5.729 0.958,0.208 10 false Engine Speed 5.229,5.333 5.604,5.542 0.375,0.208 10 false (rpm) 1.479,2.104 1.75,2.313 0.271,0.208 10 false 260 1.479,2.417 1.75,2.625 0.271,0.208 10 false 240 1.479,2.74 1.75,2.948 0.271,0.208 10 false 220 1.479,3.042 1.75,3.25 0.271,0.208 10 false 200 1.479,3.375 1.75,3.583 0.271,0.208 10 false 180 1.479,3.677 1.75,3.885 0.271,0.208 10 false 160 1.438,1.792 1.875,2 0.438,0.208 10 false (N*m) 0.583,2.875 1.104,3.083 0.521,0.208 10 false Torque 6.083,2.75 6.604,2.958 0.521,0.208 10 false Output 5.531,0.042 5.885,0.292 0.354,0.25 10 false (kW) 5.563,0.302 5.917,0.552 0.354,0.25 10 false 160 5.563,0.875 5.917,1.125 0.354,0.25 10 false 140 5.563,1.458 5.917,1.708 0.354,0.25 10 false 120 5.563,2.042 5.917,2.292 0.354,0.25 10 false 100 5.563,2.625 5.917,2.875 0.354,0.25 10 false 80 5.573,3.208 5.927,3.458 0.354,0.25 10 false 60 5.573,3.792 5.927,4.042 0.354,0.25 10 false 40 5.563,4.385 5.917,4.635 0.354,0.25 10 false 20 5.563,4.969 5.917,5.219 0.354,0.25 10 false 0


MAIN FEATURES


a.

The 1AR-FE engine has achieved the following through the use of the items listed in the table below.

i.

High performance and reliability


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions and fuel economy

Item (1) (2) (3) (4) (5)

*: Models with smart entry and start system

Engine Proper A cylinder head cover sub-assembly made of aluminum alloy is used. - - ○ - -
A taper squish shape is used for combustion chambers. ○ - - - ○
Spiny-type liners are used in the cylinder bores. ○ - ○ - ○
A water jacket spacer is used. ○ - - - ○
The piston skirt is coated with resin. ○ ○ - - ○
Low tension piston rings are used. ○ - - - ○
A resin gear balance shaft is used. - ○ ○ - -
Valve Mechanism The Dual Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
A chain sub-assembly and No. 1 chain tensioner assembly are used. - ○ - ○ -
Valve lash adjuster assemblies are used. ○ ○ - ○ -
No. 1 valve rocker arm sub-assemblies are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A linkless type throttle body with motor assembly is used. - - ○ ○ -
A stainless steel exhaust manifold converter sub-assembly is used. - - ○ - ○
An ultra thin-wall, high-cell density ceramic type Three-Way Catalytic converter (TWC) is used. - - - - ○
Fuel System A returnless fuel system is used. - - ○ ○ ○
Quick connectors are used to connect the fuel hoses with the fuel pipes. - - - ○ -
Compact 12-hole type fuel injector assemblies are used. ○ - - - ○
Ignition System The Direct Ignition System (DIS) is used. ○ - ○ ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ - - ○ ○
Charging System A segment conductor type generator assembly is used. ○ - ○ - -
A generator clutch pulley with a one-way clutch is used. ○ - - - ○
Starting System A planetary reduction type starter assembly is used. - - ○ - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System Magnetic Resistance Element (MRE) type camshaft position sensors are used. ○ - - - ○
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
An Acoustic Control Induction System (ACIS) is used. ○ - - - -
A cranking hold function is used.* ○ - - - -
An evaporative emission control system is used. - - - - ○