Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › ENGINE UNIT › 2013.12–2016.11
NM3160E _51 Engine / Hybrid System _020738 2GR-FE ENGINE MECHANICAL _0105515 ENGINE UNIT GE GENERAL F

2GR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2GR-FE engine is a 3.5 liter, 24 valve DOHC V6 engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

W114719



SPECIFICATION


a.

The specifications of the 2GR-FE engine are shown in the following table.

Engine Type 2GR-FE

*1: Models for Australia

*2: Models for Russia

*3: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. (Coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids.)

*4: The figure shown is the weight of the part without coolant and oil.

No. of Cyls. & Arrangement 6-cylinder, V Type
Valve Mechanism 24-valve DOHC, Chain Drive
(With Dual VVT-i)
Combustion Chamber Pentroof Type
Flow of Intake and Exhaust Gasses Cross-flow
Fuel System SFI
Ignition System DIS
Displacement cm3 (cu. in.) 3456 (210.9)
Bore X Stroke mm (in.) 94.0 X 83.0 (3.70 X 3.27)
Compression Ratio 10.8 : 1
Max. Output (EEC) kW@rpm 201@6200*1
183@6200*2
Max. Torque (EEC) N*m@rpm 337@4700
Oil Capacity Dry liters (US qts, Imp. qts) 7.1 (7.5, 6.2)
With Oil Filter liters (US qts, Imp. qts) 6.1 (6.4, 5.4)
Without Oil Filter liters (US qts, Imp. qts) 5.7 (6.0, 5.0)
Oil Grade API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil
Engine Coolant Type TOYOTA Genuine Super Long Life Coolant or the following*3
Capacity liters (US qts, Imp. qts) 11.2 (11.8, 9.9)
Spark Plug Type DENSO Made FK20HR11 (Iridium)
Plug Gap mm (in.) 1.0 to 1.1 (0.0394 to 0.0433)
Firing Order 1 - 2 - 3 - 4 - 5 - 6
Research Octane Number 95 or higher
Emission Regulation EURO V
Engine Service Mass*4 (Reference) kg (lb) 167 (368)

Models for Australia
W114937
0.125,0.146 1.76,0.385 1.635,0.24 12 false Performance Curve: 1.5,1.813 1.802,2.021 0.302,0.208 10 false 360 1.5,2.104 1.802,2.313 0.302,0.208 10 false 340 1.5,2.385 1.802,2.594 0.302,0.208 10 false 320 1.5,2.667 1.802,2.875 0.302,0.208 10 false 300 1.5,2.958 1.802,3.167 0.302,0.208 10 false 280 1.5,3.24 1.802,3.448 0.302,0.208 10 false 260 1.5,3.531 1.802,3.74 0.302,0.208 10 false 240 1.458,1.5 1.875,1.75 0.417,0.25 10 false (N*m) 0.542,2.625 1.125,2.875 0.583,0.25 10 false Torque 5.583,0.448 5.885,0.656 0.302,0.208 10 false 220 5.583,0.833 5.885,1.042 0.302,0.208 10 false 200 5.583,1.208 5.885,1.417 0.302,0.208 10 false 180 5.583,1.594 5.885,1.802 0.302,0.208 10 false 160 5.583,1.979 5.885,2.188 0.302,0.208 10 false 140 5.583,2.375 5.885,2.583 0.302,0.208 10 false 120 5.583,2.75 5.885,2.958 0.302,0.208 10 false 100 5.583,3.135 5.885,3.344 0.302,0.208 10 false 80 5.583,3.521 5.885,3.729 0.302,0.208 10 false 60 5.583,3.906 5.885,4.115 0.302,0.208 10 false 40 5.583,4.292 5.885,4.5 0.302,0.208 10 false 20 5.583,4.677 5.885,4.885 0.302,0.208 10 false 0 6.083,2.5 6.667,2.75 0.583,0.25 10 false Output 5.531,0.167 5.948,0.417 0.417,0.25 10 false (kW) 2.271,5.083 2.604,5.292 0.333,0.208 10 false 1000 2.708,5.083 3.042,5.292 0.333,0.208 10 false 2000 3.146,5.083 3.479,5.292 0.333,0.208 10 false 3000 3.573,5.083 3.906,5.292 0.333,0.208 10 false 4000 4,5.083 4.333,5.292 0.333,0.208 10 false 5000 4.438,5.083 4.771,5.292 0.333,0.208 10 false 6000 4.865,5.083 5.198,5.292 0.333,0.208 10 false 7000 5.271,5.083 5.688,5.333 0.417,0.25 10 false (rpm) 3.281,5.427 4.292,5.656 1.01,0.229 10 false Engine Speed

Models for Russia
W115824
1.458,1.813 1.74,2.01 0.281,0.198 10 false 360 1.458,2.104 1.75,2.313 0.292,0.208 10 false 340 1.458,2.396 1.729,2.583 0.271,0.188 10 false 320 1.458,2.688 1.75,2.896 0.292,0.208 10 false 300 1.458,2.969 1.719,3.167 0.26,0.198 10 false 280 1.458,3.25 1.74,3.448 0.281,0.198 10 false 260 1.458,3.552 1.729,3.781 0.271,0.229 10 false 240 2.281,5.083 2.615,5.25 0.333,0.167 10 false 1000 2.708,5.083 3.042,5.25 0.333,0.167 10 false 2000 3.156,5.083 3.49,5.25 0.333,0.167 10 false 3000 3.573,5.083 3.906,5.25 0.333,0.167 10 false 4000 4.01,5.083 4.344,5.25 0.333,0.167 10 false 5000 4.427,5.083 4.76,5.25 0.333,0.167 10 false 6000 4.865,5.083 5.198,5.25 0.333,0.167 10 false 7000 5.625,0.438 5.917,0.625 0.292,0.188 10 false 220 5.625,0.823 5.927,1.021 0.302,0.198 10 false 200 5.625,1.208 5.906,1.417 0.281,0.208 10 false 180 5.625,1.594 5.917,1.792 0.292,0.198 10 false 160 5.625,1.979 5.906,2.188 0.281,0.208 10 false 140 5.625,2.365 5.896,2.594 0.271,0.229 10 false 120 5.625,2.75 5.917,2.958 0.292,0.208 10 false 100 5.625,3.51 5.875,3.698 0.25,0.188 10 false 60 5.625,3.135 5.885,3.323 0.26,0.188 10 false 80 5.625,3.906 5.896,4.094 0.271,0.188 10 false 40 5.625,4.292 5.865,4.479 0.24,0.188 10 false 20 5.625,4.667 5.844,4.875 0.219,0.208 10 false 0 1.427,1.521 1.823,1.75 0.396,0.229 10 false (N*m) 0.167,0.156 1.781,0.417 1.615,0.26 12 false Performance Curve: 0.458,2.615 1.063,2.844 0.604,0.229 10 false Torque 3.24,5.438 4.25,5.667 1.01,0.229 10 false Engine Speed 5.281,5.063 5.677,5.292 0.396,0.229 10 false (rpm) 6.042,2.531 6.542,2.75 0.5,0.219 10 false Output 5.573,0.125 5.927,0.344 0.354,0.219 10 false (kW)



MAIN FEATURES


a.

The 2GR-FE engine has achieved the following through the use of the items listed in the table below.

i.

High performance and reliability


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions and fuel economy

Item (1) (2) (3) (4) (5)

*: Models with smart entry and start system

Engine Proper A steel-laminate type cylinder head gasket is used. ○ - - - -
A taper squish shape is used for combustion chamber. ○ - - - ○
A cylinder block sub-assembly made of aluminum alloy is used. - - ○ - -
The skirt portion of each piston has a resin coating applied to reduce friction. ○ ○ - - ○
An oil pan sub-assembly made of aluminum alloy is used. - ○ ○ - -
Valve Mechanism The Dual Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
Valve lash adjuster assemblies are used. ○ ○ - ○ -
A chain sub-assembly, No. 1 chain tensioner assembly (primary), and No. 2 chain tensioner assembly (secondary) are used. - ○ ○ ○ -
No. 1 valve rocker arm sub-assemblies are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust Systems A linkless type throttle body with motor assembly is used. - - ○ ○ -
An intake air surge tank made of plastic is used. - - ○ - -
Stainless steel exhaust manifold sub-assemblies (RH and LH) are used. - - ○ - ○
An ultra thin-wall, high-cell density ceramic type Three-Way Catalytic converter (TWC) is used. - - - - ○
Fuel System A fuel delivery pipe sub-assembly made of plastic is used. - - ○ - -
A returnless fuel system is used. - - ○ ○ ○
Compact 12-hole type fuel injector assemblies are used. ○ - - - ○
A multi-layer plastic fuel tank assembly is used. - - ○ - ○
Quick connectors are used to connect the fuel hoses with the fuel pipes. - - - ○ -
Ignition System The Direct Ignition System (DIS) is used. ○ - ○ ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ - - ○ ○
Charging System A segment conductor type generator assembly is used. ○ - ○ - -
A generator clutch pulley with a one-way clutch is used. ○ - - - ○
Starting System A planetary reduction-segment conductor motor type starter assembly is used. - - ○ - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System Magnetic Resistance Element (MRE) type camshaft position sensors are used. ○ - - - -
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
An Acoustic Control Induction System (ACIS) is used. ○ - - - -
The cranking hold function is used.* ○ - - - -
An evaporative emission control system is used. - - - - ○