Home › Engine / Hybrid System › 2GR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2013.12–2016.11
NM3160E _51 Engine / Hybrid System _020736 2GR-FE EMISSION CONTROL _0105517 EMISSION CONTROL SYSTEM GE GENERAL F

2GR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Exhaust Emission Control System

i.

Three-Way Catalytic converters (TWCs) are used in order to reduce exhaust emissions.


ii.

The ECM controls fuel injection volume based on the signals from the air fuel ratio sensor and oxygen sensor, optimizing the exhaust emissions.



b.

Evaporative Emission Control System

i.

The evaporative emission control system prevents the fuel vapor that is created in the fuel tank assembly from being released directly into the atmosphere.


ii.

The canister stores the fuel vapor that has been created in the fuel tank assembly.


iii.

This system consists of a purge VSV, charcoal canister assembly and ECM.


iv.

The ECM controls the purge VSV in accordance with the driving conditions in order to direct the fuel vapor into the engine, where it is burned.


v.

A canister filter is provided on the fresh air line. This air filter is maintenance-free.