Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM
NM3160E _59 Vehicle Exterior _020766 WINDOW / GLASS _0105696 POWER WINDOW CONTROL SYSTEM GE GENERAL F

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The power window control system controls power window operation using the power window regulator motor assemblies.


b.

The main controls for this system are the power window regulator master switch assembly and the power window regulator switch assemblies. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor assembly.



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expressions Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (LOCK)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)



b.

Door Control Receiver Expressions

i.

The type of door control receiver used on this model differs according to the specifications of the vehicles. The expressions listed in the table below are used in this section.

Vehicle Specification Part Name in Manual Actual Part Name
Models with Smart Entry and Start System Door Control Receiver Smart Door Control Receiver Assembly
Models without Smart Entry and Start System Door Control Receiver