Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM3160E _54 Brake _020756 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0105904 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE ASSIST  


SYSTEM CONTROL


a.

With brake assist, based on the signals from the master cylinder pressure sensor, the skid control ECU calculates the amount the brake pedal is applied and the speed at which it is depressed to determine if the driver is attempting emergency braking. If the skid control ECU determines that the driver is attempting emergency braking, the brake assist function activates the brake actuator to increase the brake fluid pressure, which increases the brake force.

X100968
2.875,0.219 4.042,0.646 1.167,0.427 10 false Skid Control ECU 0.292,0.698 2.292,1.073 2,0.375 10 false Master Cylinder Pressure Signal 0.104,1.698 1.448,2.552 1.344,0.854 10 false The fluid pressure is increased by the skid control ECU 4.708,0.708 6.344,1.115 1.635,0.406 10 false Brake Pedal Load Sensing Switch Signal 1.313,4.177 2.198,4.677 0.885,0.5 10 false Brake Force 4.417,4.24 5.99,4.833 1.573,0.594 10 false With Brake Assist 4.396,4.875 5.969,5.302 1.573,0.427 10 false Without Brake Assist 3.385,5.375 3.979,5.688 0.594,0.313 10 false Time