Home › Engine / Hybrid System › 1AR-FE LUBRICATION › LUBRICATION SYSTEM
NM3160E _51 Engine / Hybrid System _020730 1AR-FE LUBRICATION _0110712 LUBRICATION SYSTEM DE DETAILS F

1AR-FE LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL FILTER  


CONSTRUCTION


a.

An oil filter with a replaceable oil filter element is used. The oil filter element uses high performance filter paper to improve filtration performance. It is also combustible for environmental protection.


b.

A plastic filter cap sub-assembly is used to extend its life.


c.

This oil filter has a structure which can allow draining of the oil remaining in the oil filter. This prevents oil from spattering when replacing the oil filter element and allows the technician to work without touching hot oil.

W109434
5.052,2.438 7,4.531 1.948,2.094 2.74,2.438 4.844,4.531 2.104,2.094 1.344,1.354 1.344,2.26 1.344,2.26 0.979,2.26 true 0.865,2.771 1.469,2.771 true 0.854,4.479 1.458,4.479 true 0.854,5.104 1.594,5.104 true 3.083,2.802 3.688,2.802 true 3.073,3.146 3.417,3.146 true 4.073,3.479 4.073,4.052 true 5.49,3.771 6.094,3.771 true 5.5,4.271 5.969,4.271 true 0.781,2.156 0.948,2.344 0.167,0.188 10 *1 0.677,2.677 0.844,2.865 0.167,0.188 10 *2 0.677,4.375 0.844,4.563 0.167,0.188 10 *3 0.667,5 0.833,5.188 0.167,0.188 10 *4 2.885,2.698 3.052,2.885 0.167,0.188 10 *2 2.885,3.052 3.052,3.24 0.167,0.188 10 *3 4,4.094 4.167,4.281 0.167,0.188 10 *4 5.292,3.677 5.458,3.865 0.167,0.188 10 *5 5.292,4.188 5.458,4.375 0.167,0.188 10 *6 2.802,2.479 2.958,2.625 0.156,0.146 10 *a 5.115,2.49 5.271,2.635 0.156,0.146 10 *b
*1 Crankcase *2 Element
*3 Oil Filter Cap Assembly *4 Oil Filter Drain Plug
*5 Drain Pipe *6 Hose (Inside Diameter: 15 mm (0.59 in.))
*a Cross Section *b When Draining Oil