Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.12–2016.11
NM3160E _52 Drivetrain _020748 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0110734 AUTOMATIC TRANSAXLE SYSTEM GE GENERAL F

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A U660E automatic transaxle is used. This automatic transaxle is a compact, lightweight and high-capacity 6-speed super Electronically Controlled Transaxle (ECT).

i.

This automatic transaxle is equipped with a Multi-mode Automatic Transmission function.



b.

A transmission control cable assembly with a length adjustment mechanism is used. For details, refer to the Repair Manual.


c.

A shift pattern that has an S position to the side of the D position is provided.


d.

A shift lock system is used.


e.

A shift lock release button, which manually overrides the shift lock mechanism, is provided.

X116024
4.802,0.771 7.104,1.458 2.302,0.688 10 false The shift lever can be moved only with the ignition switch ON and the brake pedal depressed. 4.792,1.938 6.792,2.344 2,0.406 10 false The shift lever can be moved at a nytime.


f.

An air cooled oil cooler (oil cooler assembly) is used.



SPECIFICATION


a.

Automatic Transaxle Assembly

Transaxle Type U660E

*1: Counter gear ratio included

*2: Differential fluid included

*3: The weight shown is the weight of the part fully filled with fluid.

Gear Ratio 1st 3.300
2nd 1.900
3rd 1.420
4th 1.000
5th 0.713
6th 0.608
Reverse 4.148
Differential Gear Ratio*1 4.154
Fluid Capacity*2 Liters (US qts, Imp. qts) 6.5 (6.87, 5.72)
Fluid Type TOYOTA Genuine ATF WS
Weight (Reference)*3 kg (lb) 95.0 (209.4)

C1 No. 1 Clutch No. of Discs 4
C2 No. 2 Clutch 3
B1 No. 1 Brake 4
B2 No. 2 Brake 5
B3 No. 3 Brake 3
F1 No. 1 One-way Clutch No. of Rollers 20
Ravigneaux Planetary Gear Unit No. of Front Sun Gear Teeth 27
No. of Rear Sun Gear Teeth 30
No. of Long Pinion Gear Teeth 20
No. of Short Pinion Gear Teeth 22
No. of Ring Gear Teeth 69
U/D Planetary Gear Unit No. of Sun Gear Teeth 66
No. of Pinion Gear Teeth 21
No. of Ring Gear Teeth 110
Counter Gear No. of Drive Gear Teeth 44
No. of Driven Gear Teeth 47


b.

Torque Converter Assembly

Torque Converter Assembly Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.78



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)