Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.12–2016.11
NM3160E _52 Drivetrain _020748 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0110734 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  ATF FILLING PROCEDURE  


CONSTRUCTION


a.

A special ATF filling procedure is used in order to improve the accuracy of the ATF level when the transaxle is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in a conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.


b.

This filling procedure uses the refill plug, overflow plug, ATF temperature sensor and D indicator. For details about the ATF filling procedure, refer to the Repair Manual.

X100050
5.813,2.24 5.531,1.313 5.531,1.313 5.25,1.313 true 5.896,2.688 5.896,3.042 true 0.594,0.938 0.781,1.219 0.188,0.281 10 *1 5.063,1.219 5.25,1.385 0.188,0.167 10 *a 5.844,3.052 6.042,3.344 0.198,0.292 10 *2
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -