Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.12–2016.11
NM3160E _52 Drivetrain _020748 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0110734 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  TCM  


CONSTRUCTION


a.

The TCM has been isolated from the ECM and directly fitted to the transaxle. Thus, the wiring harness has been shortened, reducing weight. All the solenoid valves and sensors used for automatic transaxle control are directly connected to the TCM through the connector located in front of the automatic transaxle.


b.

The TCM maintains communication with the ECM through the Controller Area Network (CAN). Thus, engine control is performed in coordination with ECT control.


c.

A label, on which the automatic transaxle compensation values and Quick Response (QR) code are printed, is attached on the top of the automatic transaxle. The label contains encoded information about the characteristics of the automatic transaxle. When the automatic transaxle is replaced, allow the TCM to learn the characteristics of the automatic transaxle by inputting the automatic transaxle compensation values into the TCM using the Global TechStream (GTS). In this way, the shift control performance immediately after replacement of the automatic transaxle is improved. For details, refer to the Repair Manual.


d.

The QR code, which requires a special tool to read, is used at the vehicle assembly plant.

X100071
1.656,1.115 1.375,0.521 1.375,0.521 1.177,0.521 true 5.354,0.906 4.75,0.906 true 5.25,1.563 4.76,1.563 true 1.979,2.917 1.531,4.104 true 1.01,0.448 1.365,0.625 0.354,0.177 10 *1 4.563,0.844 5.188,1.021 0.625,0.177 10 *2 1.448,4.156 1.635,4.344 0.188,0.188 10 *4 4.583,1.49 4.792,1.677 0.208,0.188 10 *3 3.656,1.958 3.854,2.156 0.198,0.198 10 *a
*1 TCM *2 QR Code
*3 Automatic Transaxle Compensation Value *4 Transaxle Connector
*a Automatic Transaxle Front View - -


HINT:

What are Quick Response (QR) Codes?

·

QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.

·

QR codes encode many types of data such as numeric, alphanumeric, kanji, kana and binary codes. A maximum of 7,089 characters (numeric) can be encoded.

·

QR codes (2D code) contain information in the vertical and horizontal directions, whereas bar codes only contain data in one direction. QR codes (2D code) hold considerably greater volumes of information than bar codes.