Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING SYSTEM › from 2016.11
NM3160E _53 Suspension _060781 TIRE PRESSURE MONITORING _0298032 TIRE PRESSURE WARNING SYSTEM DE DETAILS F

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING SYSTEM  DETAILS  TIRE PRESSURE WARNING VALVE AND TRANSMITTER  


CONSTRUCTION


a.

The tire pressure warning valve and transmitters are integrated into the tire valve. Each tire pressure warning valve and transmitter consists of a lithium battery, sensor and transmitter.


b.

Make sure not to damage the urethane-covered backside of the transmitter (the surface opposite to the side with the ID code) with anything sharp.


c.

The transmitter directly measures tire inflation pressure and temperature to see if the vehicle can continue to run.


d.

The transmitter transmits the measured tire inflation pressure and temperature values to the tire pressure warning antenna at a frequency of 433 MHz.


e.

Depending on the timing of the data transmission, it may take several minutes to receive the data from the tire pressure warning valve and transmitter.


f.

The ID code is written on the tire pressure warning valve and transmitter.

X124338C01
1.313,1.833 1.677,0.885 1.677,0.885 1.875,0.885 true 1.667,2.135 2.104,1.25 2.104,1.25 2.302,1.25 true 1.979,2.51 2.344,1.844 2.344,1.844 2.542,1.844 true 1.125,3.563 1.344,3.563 1.344,3.563 2.031,2.688 true 1.146,3.896 1.365,3.896 1.365,3.896 2.198,2.844 true 2.885,3.583 2.677,3.583 2.677,3.583 2.313,2.969 true 4.656,2.292 4.448,2.292 4.448,2.292 4.083,1.677 true 6.25,2.167 6.042,2.167 6.042,2.167 5.885,1.531 true 3.208,1.052 3.375,1.052 3.375,1.052 3.625,1.479 true 1.917,0.781 2.229,0.938 0.313,0.156 10 false *1 2.354,1.167 2.667,1.323 0.313,0.156 10 false *2 2.583,1.75 2.896,1.906 0.313,0.156 10 false *3 0.938,3.479 1.115,3.656 0.177,0.177 10 false *4 0.979,3.813 1.146,4.01 0.167,0.198 10 false *5 2.927,3.5 3.24,3.656 0.313,0.156 10 false *6 3.031,0.958 3.219,1.177 0.188,0.219 10 false *a 4.698,2.188 5.01,2.344 0.313,0.156 10 false *b 6.271,2.063 6.583,2.219 0.313,0.156 10 false *c
*1 Tire Pressure Warning Valve and Transmitter *2 Grommet
*3 Washer *4 Nut
*5 Tire Valve Core *6 Cap
*a Lithium Battery *b Sensor and Transmitter
*c ID Code (7 Digit Hexadecimal) - -


HINT:
·

The lithium batteries of the tire pressure warning valve and transmitter are non-replaceable. If the lithium battery is depleted, the tire pressure warning valve and transmitter must be replaced (battery life: approximately 10 years).

·

When replacing a tire pressure warning valve and transmitter, the ID codes of each tire pressure warning valve and transmitters must be registered. If even one of the tire pressure warning valve and transmitters is replaced, the ID codes of all tire pressure warning valve and transmitter must be registered again. Record all existing ID codes before beginning the process to enter new ID codes.

·

To register an ID code, use the Global TechStream (GTS) to enter the ID codes that are indicated on the tire pressure warning valve and transmitter.

·

Be careful not to damage the tire pressure warning valve and transmitters when removing and reinstalling them.

·

Replace the grommet, valve core, washer and nut with new ones when replacing or removing and reinstalling the tire pressure warning valve and transmitter. This is necessary to ensure sealing performance.

·

When replacing a valve cap, use only the specified cap. If an unspecified cap is used, it may seize to the tire pressure warning valve and transmitter.

·

For details, refer to the Repair Manual.