Home › Engine / Hybrid System › 2GR-FKS ENGINE MECHANICAL › ENGINE UNIT › from 2016.11
NM3160E _51 Engine / Hybrid System _060957 2GR-FKS ENGINE MECHANICAL _0298832 ENGINE UNIT DE DETAILS F

2GR-FKS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

A high-expansion cycle (Atkinson cycle) is used to improve heat efficiency.


b.

On the intake side, Variable Valve Timing-intelligent Wide (VVT-iW), which is provided with an intermediate lock mechanism that optimally controls the intake camshaft (camshaft and No. 3 Camshaft Sub-assembly) to the valve timings according to driving conditions, is used.


c.

On the exhaust side, Variable Valve Timing-intelligent (VVT-i), which optimally controls the exhaust camshaft (No. 2 camshaft and No. 4 Camshaft Sub-assembly) to the valve timings according to driving conditions, is used.

Valve Timing Variable Range
W123161E02
4.49,1.25 4.76,1.573 4.76,1.573 4.99,1.573 true 2.708,1.26 2.594,1.563 2.594,1.563 2.417,1.563 true 4.438,1 4.823,0.75 4.823,0.75 5.083,0.75 true 0.125,0.146 2.573,0.344 2.448,0.198 10 false VVT-iW (Intake) + VVT-i (Exhaust) 0.146,1.938 2.594,2.135 2.448,0.198 10 false Dual VVT-i (Reference) 1.667,0.833 2.521,1.063 0.854,0.229 10 false Valve Lift 1.781,2.677 2.635,2.906 0.854,0.229 10 false Valve Lift 2.938,0.063 3.792,0.292 0.854,0.229 10 false Retard 2.875,1.979 3.615,2.281 0.74,0.302 10 false Retard 3.583,0.063 4.438,0.292 0.854,0.229 10 false Advance 4.25,0.063 5.104,0.292 0.854,0.229 10 false Retard 3.604,1.979 4.448,2.271 0.844,0.292 10 false Advance 5.052,1.458 5.906,1.688 0.854,0.229 10 false Intake 3.156,1.396 4.625,1.646 1.469,0.25 10 false Crank Angle (CA) 3.115,3.24 4.583,3.49 1.469,0.25 10 false Crank Angle (CA) 1.875,1.458 2.729,1.688 0.854,0.229 10 false Exhaust 5.135,0.656 6.104,1.052 0.969,0.396 10 false Lock Position


d.

A timing rotor for the camshaft position sensor is provided at each the intake and exhaust camshafts.


e.

The No. 1 valve rocker arm sub-assembly is used as a valve mechanism and by achieving size reduction while drastically reducing the amount of friction that occurs between the sliding parts and cams, low fuel consumption is achieved. Also, an oil pressure type valve lash adjuster assembly is used to make valve clearance adjustment unnecessary in consideration of serviceability.


f.

The cam that drives the fuel pump assembly (for high pressure) is positioned directly above the exhaust camshaft on the right bank to achieve size reduction. Also, a pump cam with 3 peaks is used in the cam that drives the fuel pump assembly (for high pressure) and by synchronizing fuel pressure-feeding and fuel injection, the difference in fuel pressure between cylinders is reduced.


g.

The vacuum pump assembly is driven by the end of the intake camshaft on the right bank.


h.

A valve spring (inner compression spring), whose upper portion is shaped like a beehive, is used to reduce inertial mass. As a result, the load on the valve spring (inner compression spring) and friction are reduced.


i.

The diameter of the valve spring retainer has been decreased to reduce inertial mass and friction.


j.

The intake camshafts are driven by the crankshaft via the primary timing chain. The exhaust camshafts are each driven by the intake camshaft of their respective bank via a secondary chain.

W134902C01
1.667,1.167 1.917,1.167 1.917,1.167 2.167,1.833 true 1.417,1.417 1.667,1.417 1.667,1.417 2,1.917 true 0.333,1.417 0.5,1.417 0.5,1.417 0.833,1.75 true 0.333,2.083 0.5,2.083 0.5,2.083 0.833,2.417 true 0.75,2.833 0.917,2.833 0.917,2.833 1.25,2.5 true 1,3.25 1.167,3.25 1.167,3.25 1.5,2.833 true 3,0.667 3.25,0.417 3.25,0.417 3.417,0.417 true 3.167,1.667 3.417,0.833 3.417,0.833 3.583,0.833 true 3.417,1.583 3.75,1 3.75,1 3.917,1 true 3.5,1.667 4.083,1.167 4.083,1.167 4.25,1.167 true 5.25,1 5.5,0.667 5.5,0.667 5.667,0.667 true 5.76,1.458 5.927,1.458 5.927,1.458 6.177,1.792 true 5.677,1.688 5.844,1.688 5.844,1.688 6.094,1.938 true 5.667,1.917 5.833,1.917 5.833,1.917 6,2.083 true 6.417,1.583 6.667,1.417 6.667,1.417 6.833,1.417 true 6.333,2.25 6.583,2.083 6.583,2.083 6.75,2.083 true 5.917,2.333 6.167,2.583 6.167,2.583 6.333,2.583 true 5.698,2.781 5.948,3.031 5.948,3.031 6.115,3.031 true 5.563,3.125 5.813,3.375 5.813,3.375 5.979,3.375 true 5.333,3.417 5.583,3.667 5.583,3.667 5.75,3.667 true 5.135,3.833 5.385,4.083 5.385,4.083 5.552,4.083 true 4.281,1.729 4.792,1.604 4.792,1.604 4.958,1.604 true 4.49,1.99 4.896,1.844 4.896,1.844 5.063,1.844 true 1.49,1.052 1.677,1.26 0.188,0.208 10 false *1 1.229,1.313 1.427,1.5 0.198,0.188 10 false *2 0.802,3.156 0.99,3.365 0.188,0.208 10 false *3 3.958,0.896 4.156,1.104 0.198,0.208 10 false *4 4.292,1.073 4.469,1.24 0.177,0.167 10 false *5 4.99,1.5 5.177,1.688 0.188,0.188 10 false *6 5.094,1.75 5.302,1.948 0.208,0.198 10 false *7 3.438,0.313 3.646,0.531 0.208,0.219 10 false *8 3.615,0.729 3.813,0.938 0.198,0.208 10 false *9 5.719,0.563 6,0.75 0.281,0.188 10 false *10 6.865,1.313 7.135,1.521 0.271,0.208 10 false *11 5.51,1.354 5.771,1.563 0.26,0.208 10 false *12 5.438,1.583 5.698,1.781 0.26,0.198 10 false *13 5.406,1.813 5.656,2.01 0.25,0.198 10 false *14 6.781,1.969 7.031,2.167 0.25,0.198 10 false *15 6.354,2.479 6.635,2.667 0.281,0.188 10 false *16 6.135,2.917 6.385,3.104 0.25,0.188 10 false *17 6,3.26 6.271,3.469 0.271,0.208 10 false *18 5.792,3.573 6.052,3.76 0.26,0.188 10 false *19 5.583,3.99 5.844,4.188 0.26,0.198 10 false *20 0.563,2.729 0.75,2.938 0.188,0.208 10 false *3 0.156,1.979 0.344,2.188 0.188,0.208 10 false *3 0.146,1.323 0.333,1.531 0.188,0.208 10 false *3
*1 Camshaft Timing Gear Assembly *2 Camshaft Timing Exhaust Gear Assembly
*3 Cam Timing Oil Control Solenoid Assembly *4 Intake Camshaft (Camshaft)
*5 Exhaust Camshaft (No. 2 Camshaft) *6 Intake Camshaft (No. 3 Camshaft Sub-assembly)
*7 Exhaust Camshaft (No. 4 Camshaft Sub-assembly) *8 Fuel Pump Assembly (for High Pressure)
*9 Fuel Pump Assembly (for High Pressure) Driving Cam *10 Vacuum Pump Assembly
*11 No. 1 Valve Rocker Arm Sub-assembly *12 Valve Stem Cap
*13 Valve Spring Retainer Lock *14 Valve Spring Retainer
*15 Valve Lash Adjuster Assembly *16 Valve Spring (Inner Compression Spring)
*17 Valve Stem Oil Seal *18 Valve Spring Seat
*19 Valve Guide Bushing *20 Valve


Valve Timing
W134903C01
2.5,0.417 2.75,0.417 2.75,0.417 3.25,0.833 true 3.906,0.76 4.406,0.344 4.406,0.344 4.74,0.344 true 4.333,2.74 4.75,3.073 4.75,3.073 5.083,3.073 true 1.833,2.573 2.083,2.573 2.083,2.573 2.5,2.323 true 3.479,0.24 3.677,0.469 0.198,0.229 10 false *a 3.51,3.354 3.708,3.552 0.198,0.198 10 false *b 2.302,0.313 2.51,0.531 0.208,0.219 10 false *c 4.781,0.229 4.969,0.427 0.188,0.198 10 false *d 0.406,3.146 0.604,3.354 0.198,0.208 10 false *e 0.417,3.521 0.583,3.719 0.167,0.198 10 false *f 2.031,1.448 2.438,1.667 0.406,0.219 10 false 105° 2.802,3.031 3.115,3.26 0.313,0.229 10 false 30° 3.948,3.125 4.396,3.385 0.448,0.26 10 false 22.5° 4.74,2.396 5.188,2.656 0.448,0.26 10 false 64° 4.458,0.875 4.906,1.104 0.448,0.229 10 false 41.5° 4.302,0.677 4.75,0.906 0.448,0.229 10 false 33° 3.625,0.448 3.885,0.677 0.26,0.229 10 false 0° 2.583,0.76 2.938,1 0.354,0.24 10 false 42° 1.646,2.458 1.854,2.677 0.208,0.219 10 false *c 5.115,2.958 5.302,3.156 0.188,0.198 10 false *d
*a TDC *b BDC
*c VVT-iW Operation Range *d VVT-i Operation Range
*e Intake Valve Opening Angle *f Exhaust Valve Opening Angle