Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2016.11
NM3160E _58 Vehicle Interior _061821 PRE-COLLISION _0305758 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


OPERATION


a.

Warning Indication

i.

The combination meter assembly uses the multi-information display, master warning light, PCS warning light and buzzer to provide the driver with pre-collision system malfunction and indications.


ii.

If the driving support ECU assembly determines that the possibility of a collision is high, it sends a signal to the combination meter assembly and skid control buzzer assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display and skid control buzzer assembly sounds. Details are indicated below.

When there is a high possibility of a collision
Multi-information Display Skid Control Buzzer Assembly
BRAKE ! Sounds Continuously


iii.

When the system is not available, the following warning occurs to warn the driver.

When a system malfunction is detected
Multi-information Display Detail Master Warning Light PCS Warning Light Buzzer DTC
Pre-Collision System Malfunction Visit Your Dealer This message appears when the driving support ECU assembly detects a system malfunction. Illuminates Flashes Sounds once Repair is required DTCs are stored
Pre-Collision System Unavailable
·

Millimeter wave radar sensor is misaligned

·

When the millimeter wave radar sensor is hot

·

Power source voltage has decreased, etc.


- Flashes - -
Pre-Collision System Unavailable Clean Sensor Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly - Flashes - -
Front Camera System Unavailable Clean Windshield Dirty windshield glass over the camera sensor - Flashes - -
Front Camera System Unavailable Temperature or power supply of camera sensor is abnormality - Flashes - -
VSC Turned Off Pre-Collision Brake System Unavailable VSC operation have been disabled - Illuminates - -



b.

Changing settings of the pre-collision system

i.

To change the enabled or disabled of the pre-collision system using the multi-information display and the steering pad switch assembly (meter control switches), display the setting display screen.

1.

On the setting display screen, select PCS icon (PCS warning light same design) and then press on Enter/Set switch of the steering pad switch assembly.

2.

Select the [PCS] and then press on Enter/Set switch of the steering pad switch assembly.

3.

Select the [ON] / [OFF] on the screen and press on Enter/Set switch of the steering pad switch assembly, the system will be enabled/disabled.

Y209569C01
5.781,1.677 6.406,1.677 true 4.792,0.24 5.021,0.438 0.229,0.198 10 false *a 0.698,1.198 0.927,1.396 0.229,0.198 10 false *b 5.135,0.865 5.333,1.083 0.198,0.219 10 true *c 6.438,1.583 6.635,1.802 0.198,0.219 10 true *d
*a PCS Warning Light *b Multi-information Display
*c Steering Pad Switch Assembly
·

Meter Control Switches


*d Enter/Set Switch



HINT:
·

If the system is disabled, the PCS warning light will turn on and a message will be displayed on the multi-information display.

·

The system is automatically enabled each time the engine switch is turned to ON.




ii.

The pre-collision warning timing can be changed on setting display of the multi-information display.

1.

On the setting display screen, select PCS icon (PCS warning light same design) and then press on Enter/Set switch of the steering pad switch assembly.

2.

Select [Sensitivity] and then press on Enter/Set switch of the steering pad switch assembly, warning timing of the pre-collision system will be changed (Far/Middle/Near).

3.

Select the operation timing icon on the screen and press on Enter/Set switch of the steering pad switch assembly.

Y209570C01
5.802,1.688 6.406,1.688 true 0.375,0.323 0.594,0.51 0.219,0.188 10 false *a 0.969,0.323 1.188,0.531 0.219,0.208 10 false *b 1.563,0.333 1.844,0.542 0.281,0.208 10 false *c 5.125,0.875 5.354,1.125 0.229,0.25 10 true *d 6.438,1.583 6.625,1.792 0.188,0.208 10 true *e
*a Far *b Middle
*c Near *d Steering Pad Switch Assembly
·

Meter Control Switches


*e Enter/Set Switch - -