Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2016.11
NM3160E _58 Vehicle Interior _061821 PRE-COLLISION _0305758 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


OPERATING CONDITION


a.

When all of the following conditions have been met, the camera heater (forward recognition with heater hood sub-assembly) operates.

·

The engine switch is turned on (IG).

·

The outside air temperature is approximately 10°C or less.

·

A few minutes have elapsed since the camera heater (forward recognition with heater hood sub-assembly) operation stopped.



b.

After the camera heater (forward recognition with heater hood sub-assembly) operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).




CONSTRUCTION


a.

The camera heater (forward recognition with heater hood sub-assembly) is composed of the sheet heater (heating element) and temperature fuse, etc. Current is run through the sheet heater (heating element) to generate heat and warm the front portion of the forward recognition camera (camera sensor).

Y206825C01
3.521,1.844 4.5,1.094 4.5,1.094 4.667,1.094 true 2.99,1.906 2.5,1.083 2.5,1.083 2.333,1.083 true 2.115,0.969 2.427,1.125 0.313,0.156 10 false *1 4.74,1.01 5.052,1.167 0.313,0.156 10 false *2
*1 Sheet Heater (Heating Element) *2 Temperature Fuse


Heater Specifications
Item Specification
Heat Generation 5 W or less