Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM3160E _57 Power Source / Network _019704 NETWORKING _0095459 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Door Bus Lines
Component Master Control LIN Communication DTC Output Function
Main Body ECU (Multiplex Network Body ECU) ○ ○
Power Window Regulator Motor Assembly (for Driver Door) - -
Power Window Regulator Motor Assembly (for Front Passenger Door) - -
Power Window Regulator Motor Assembly (for Rear LH Door)*1 - -
Power Window Regulator Motor Assembly (for Rear RH Door)*1 - -
Power Window Regulator Master Switch Assembly - -
Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*2 - -

*1: for Models with Jam Protection Function on 4 Windows

*2: w/ Sliding Roof System


Certification Bus Lines (w/ Smart Entry and Start System)
Component Master Control LIN Communication DTC Output Function
Certification ECU (Smart Key ECU Assembly) ○ ○
Steering Lock ECU (Steering Lock Actuator Assembly) - -
ID Code Box (Immobiliser Code ECU)* - -

*: for LHD